- 通信圈 (http://cntxj.net/bbs/index.asp)
-- 运营商 · 设备商 · 虚拟运营 · 运营人 (http://cntxj.net/bbs/list.asp?boardid=18)
---- 浅谈电力通信综合监控系统中的协议转换 (http://cntxj.net/bbs/dispbbs.asp?boardid=18&id=8663)
-- 发布时间：2008/11/25 21:24:54
-- 浅谈电力通信综合监控系统中的协议转换
以下内容只有回复后才可以浏览
-- 发布时间：2008/11/28 14:46:03
--
fgfu
-- 发布时间：2008/12/3 16:45:36
--
研究一下
-- 发布时间：2008/12/3 18:43:21
--
了解一下
-- 发布时间：2008/12/21 10:28:09
--
了解一下有好处
-- 发布时间：2009/1/21 11:13:45
--
看看
-- 发布时间：2009/2/1 10:41:24
--
不知道具体内容，看看再说
-- 发布时间：2009/4/3 10:15:00
--
看看，谢谢
-- 发布时间：2009/7/4 17:33:50
--
给我看看
-- 发布时间：2009/8/7 8:48:44
--
我也想学习一下
-- 发布时间：2009/8/16 15:46:46
--
爱爱爱
-- 发布时间：2009/9/8 16:03:05
--
xiexie
-- 发布时间：2009/9/21 8:43:44
--
好资料
-- 发布时间：2009/9/21 10:07:26
--
-- 发布时间：2009/9/21 16:23:19
--
take a look
-- 发布时间：2009/10/16 19:19:08
--
-- 发布时间：2009/11/16 22:40:18
--
交流一下
-- 发布时间：2009/11/25 19:47:32
--
看看是啥咧
-- 发布时间：2009/12/8 16:49:41
--
正准备做这项工作
-- 发布时间：2010/5/12 19:31:35
--
看看先
-- 发布时间：2010/8/3 14:59:33
-- OK
好资料，谢谢分享
-- 发布时间：2010/8/17 17:04:11
--
看看再说
-- 发布时间：2010/9/29 20:35:39
--
学习
-- 发布时间：2010/12/24 21:51:36
-- and effect the visibility
Coating is the critical step among marking construction, sealcoating equipment and please pay more stict attention to its operation procedures. Coating procedures and precautions: 1) Check pavement marking equipment and inspect the construction equipment carefully and assure that they are in good condition. Please do pre-marking, and check pavement striping machines the color, thickness, width, volume and glass beads spread volume. if necessary, adjust the parameters and asphalt striping machine. 2) Coating should be start after the primer drying thoroughly. Or, the solvent will penetrate the unhardened paint film, resulting in solvent bubbles, field striping machine and marking contamination. 3) To ensure the visibility of markings at night, please spread glass beads when coating construction. It is demonstrated that half of the diameter of field marking equipment glass beads embedded in coating that the reflect effect is the best. But we should know that the glass bead will be buried in the coating if line marking equipment the paint temperature is high, while the glass beads spreading speed is fast ,and the glass beads can not adhered to coating firmly and is easy to come off if the paint temperature is low, while line markers glass beads spreading speed is slow, for at that time the coating is almost solidified, which will affect the whole reflect effect. Glass beads should be spreaded uniformly, generally speaking, 0.3~0.5kg on square meter is proper. If line striping equipment the glass bead is too excessive, it will make the markings\' color bad and cause uneven visual effect, and is easy for dust to stick on it and effect the visibility.
-- 发布时间：2016/3/10 15:48:13
-- 阿瓦打我的
阿瓦打我的
-- 发布时间：2018/9/25 20:21:32
--
谢谢